Description
- 6 x SPRING BRAKE
- SARN #24614 APPROVAL
Important Fitting Instructions
- Service line brake hose from 1st relay max length: 1m
- Service line brake hose from 2nd relay max length: 1.5m
(All service line lengths must be equal) - Refer to drawing for max 3/8” Blue nylon lengths
- No restrictions on all Maxi supply rubber hose & 3/8” nylon
| | 1/2” Maxi Supply Rubber Hose |
| |||||||||||||||||||| | 1/2” Service Brake Rubber Hose |
| | 3/8” Red Nylon Pipe |
| 3/8” Blue Nylon Pipe |
BILL OF MATERIALS FOR KIT SBX100
| NO. | PART NO. | DESCRIPTION | QTY |
| 01 | RES25LT | 25LT RESERVOIR | 1 |
| 02 | Jumbo | Air Tank 60LT | 1 |
| 03 | AA3802 | SR38 Spring Brake Control | 1 |
| 07 | AA102626 | R12 Relay Valve | 2 |
| 968-6PXDOT | 3/8” x ¼” Male Connector | 1 | |
| 968-6-8PXDOT | 3/8” x ½” Male Connector | 2 | |
| 964-6PXDOT | 3/8” Union Tee P/In | 1 | |
| 969-6PXDOTS | 3/8” x ¼” BSP Male Elbow | 2 | |
| 969-6-6PXDOTS | 3/8” x 3/8” BSP Male Elbow | 2 | |
| 972-6PXDOT | 3/8” x ¼” Male Branch Tee | 1 | |
| 73750-6 | 3/8” Street Tee | 3 | |
| 73152-12 | ¾” PLUG | 2 | |
| 73152-8 | ½” Plug | 6 | |
| 73325-12-8S | ¾” x ½” Nipple Steel | 2 | |
| 73220-12-6 | ¾” x 3/8” Reducing Bush | 2 | |
| 125-8-6 | ½” x 3/8” Hose Barb Male | 18 | |
| 125-8-8 | ½” x ½” Hose Barb Male | 6 | |
| 12250 | ½” Rubber Hose | 15 | |
| 6-500BU | 3/8” Blue Nylon | 15 | |
| 6-500RD | 3/8” Red Nylon | 15 | |
| 41-022 | Hose Clamps | 24 | |
| 145 | ¼” Air Tank Drain Cock | 2 | |
| 11 | PWM2076 | 3/8” Test Point | 1 |
| 33-A420 | ½” Mounting Bracket | 1 | |
| CA93-20 | ½” Male Adapter | 1 | |
| CA93-85 | ½” Male Coupling | 1 | |
| 220TMP | Mounting Tank Pad | 4 | |
| 09 | SB30/30SB | Spring Brakes | 6 |
NOTE: ANY DEVIATION FROM THIS DRAWING OR KIT CONTENTS AS SUPPLIED MAY INVALIDATE ADR COMPLIANCE. RELATIVE POSITION OF VALVE/S & TANK/S ON DRAWING IS FOR GUIDANCE ONLY. VALVES MUST BE POSITIONED TO KEEP AIR LINE LENGTHS WITHIN LIMITS INDICATED.
