Description
- SARN #26493 APPROVAL
Important Fitting Instructions
- Service line brake hose max length: 1.5m
(All service line lengths must be equal) - Refer to drawing for max 3/8” & 5/8” Blue nylon lengths
- No restrictions on all Maxi supply rubber hose & 3/8” nylon
| 1/2” Maxi Supply Rubber Hose |
|||||||||||||||||||| | 1/2” Service Brake Rubber Hose |
| 3/8” Red Nylon Pipe |
3/8” Blue Nylon Pipe | |
5/8” Blue Nylon Pipe |
BILL OF MATERIALS FOR KIT SBX110
NO. | PART NO. | DESCRIPTION | QTY |
01 | RES25LT | 25LT RESERVOIR | |
02 | Jumbo | Air Tank 60LT | |
03 | AA3802 | SR38 SPRING BRAKE CONTROL | |
04 | AA065476 | R12P PILOT RELAY VALVE | |
05 | 23-FMT08 | ½” MALE x FEMALE BALL VALVE | |
06 | AA102626 | R12 RELAY VALVE | |
07 | 968-6PXDOT | 3/8” x ¼” MALE CONNECTOR | |
968-6-6PXDOT | 3/8” x 3/8” MALE CONNECTOR | ||
968-6-8PXDOT | 3/8” x ½” MALE CONNECTOR | ||
968-10-6PXDOT | 5/8” x 3/8” MALE CONNECTOR P/IN | ||
968-10PXDOT | 5/8” x ½” MALE CONNECTOR P/IN | ||
964-6PXDOT | 3/8” UNION TEE P/IN | ||
969-6PXDOTS | 3/8” x ¼” BSP MALE ELBOW | ||
969-6- 6PXDOTS | 3/8” x 3/8” MALE ELBOW | ||
73152-6 | 3/8” PLUG | ||
73750-6 | 3/8” STREET TEE | ||
73325-12-8S | ¾” x ½” NIPPLE STEEL | ||
73220-12-6 | ¾” x 3/8” REDUCING BUSH | ||
125-8-6 | ½” x 3/8” HOSE BARB MALE | ||
125-8-8 | ½” x ½” HOSE BARB MALE | ||
12250 | ½” RUBBER HOSE | ||
6-500BU | 3/8” BLUE NYLON | ||
6-500RD | 3/8” RED NYLON | ||
10-250BU | 5/8” BLUE NYLON | ||
41-022 | HOSE CLAMPS | ||
145 | ¼” AIR TANK DRAIN COCK | ||
11 | PWM2076 | 3/8” TEST POINT | |
33-A420 | ½” MOUNTING BRACKET | ||
CA93-20 | ½” MALE ADAPTER | ||
CA93-85 | ½” MALE COUPLING | ||
220TMP | MOUNTING TANK PAD | ||
09 | SB30/30SB | SPRING BRAKES |
NOTE: ANY DEVIATION FROM THIS DRAWING OR KIT CONTENTS AS SUPPLIED MAY INVALIDATE ADR COMPLIANCE. RELATIVE POSITION OF VALVE/S & TANK/S ON DRAWING IS FOR GUIDANCE ONLY. VALVES MUST BE POSITIONED TO KEEP AIR LINE LENGTHS WITHIN LIMITS INDICATED.