Description
- QUAD AXLE
- SARN #33278 APPROVAL
Important Fitting Instructions
- Service line brake hose max length: 2m
(All service line lengths must be equal) - Refer to drawing for max 3/8” & 5/8” Blue nylon lengths
- No restrictions on all Maxi supply rubber hose & 3/8” nylon
| | 1/2” Maxi Supply Rubber Hose |
| |||||||||||||||||||| | 1/2” Service Brake Rubber Hose |
| | 3/8” Red Nylon Pipe |
| 3/8” Blue Nylon Pipe |
BILL OF MATERIALS FOR KIT SBX00-38-14A
| NO. | PART NO. | DESCRIPTION | QTY |
| 02 | Jumbo | Air Tank 60LT | 2 |
| 03 | AA3802 | SR38 SPRING BRAKE CONTROL | 2 |
| 04 | AA065476 | R12P PILOT RELAY | 1 |
| 07 | AA102626 | R12 RELAY VALVE | 2 |
| 968-6PXDOT | 3/8” x ¼” MALE CONNECTOR | 2 | |
| 968-6-6PXDOT | 3/8” x 3/8” MALE CONNECTOR P/IN | 2 | |
| 968-6-8PXDOT | 3/8” x ½” MALE CONNECTOR | 2 | |
| 964-6PXDOT | 3/8” UNION TEE P/IN | 1 | |
| 969-6PXDOTS | 3/8” x ¼” MALE ELBOW | 5 | |
| 969-6-6PXDOTS | 3/8” x 3/8” MALE ELBOW | 2 | |
| 73750-6 | 3/8” STREET TEE | 1 | |
| 73152-6 | 3/8” PLUG | 2 | |
| 73152-8 | ½” PLUG | 5 | |
| 73152-12 | ¾” PLUG | 1 | |
| 73325-12-8S | ¾” x ½” NIPPLE STEEL | 3 | |
| 73220-12-6 | ¾” x 3/8” REDUCING BUSH | 2 | |
| 125-8-6 | ½” x 3/8” HOSE BARB MALE | 24 | |
| 125-8-8 | ½” x ½” HOSE BARB MALE | 8 | |
| 12250 | ½” RUBBER HOSE | 20 | |
| 6-500BU | 3/8” BLUE NYLON | 20 | |
| 6-500RD | 3/8” RED NYLON | 20 | |
| 41-022 | HOSE CLAMPS | 32 | |
| 145 | ¼” AIR TANK DRAIN COCK | 2 | |
| 11 | PWM2076 | 3/8” TEST POINT | 1 |
| 33-A420 | ½” MOUNTING BRACKET | 1 | |
| CA93-20 | ½” MALE ADAPTER | 1 | |
| CA93-85 | ½” MALE COUPLING | 1 | |
| 220TMP | MOUNTING TANK PAD | 4 | |
| 09 | SB30/30SB | SPRING BRAKES | 8 |
NOTE: ANY DEVIATION FROM THIS DRAWING OR KIT CONTENTS AS SUPPLIED MAY INVALIDATE ADR COMPLIANCE. RELATIVE POSITION OF VALVE/S & TANK/S ON DRAWING IS FOR GUIDANCE ONLY. VALVES MUST BE POSITIONED TO KEEP AIR LINE LENGTHS WITHIN LIMITS INDICATED.
